Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

What is IEC 60335-1 Standard?

1. Safety Standard IEC60335-1

IEC 60335-1:2010 deals with the safety of electrical appliances for household and similar purposes.

Table1 shows the comparison of requirement between IEC60335-1 and IEC60950-1 in terms of safety.

Table1 The comparison of requirement between IEC60335-1 and IEC60950-1 in terms of safety
# Safety standard IEC60950-1 IEC60335-1 200V IEC60335-1 100V
Over voltage category
1 Isolation voltage
*1
Input - Output 3,000 2.4・U+2400 2,000
Input - FG 1,500 1.2・U+950 1,000
Output - FG (500) - -
2 Creepage
*2
200-250V *3 2.5/5.0 2.5/5.0 2.5/5.0
250-300V *3 3.2/6.4 4.0/8.0 4.0/8.0
300-400V *3 4.0/8.0 4.0/8.0 4.0/8.0
3 Clearance
*2
150-250V *4 2.0/4.0 2.0/3.5 2.0/3.5
250-300V *4 2.0/4.0 2.0/3.5 2.0/3.5
300-400V *4 3.2/6.4 - -
4 Leakage current Hand-held 0.75mA - -
Movable 3.5mA - -
Stationary 3.5mA - -
Portable class I appliances - 0.75mA 0.75mA
Stationary class I motor-operated appliances - 3.5mA 3.5mA
5 Maximum temperature (Wire) Type A Less than 90℃ - -
Type E Less than 105℃ - -
Type B Less than 110℃ - -
6 Temperature increasing (Wire) Type A - Less than 65deg Less than 65deg
Type E - Less than 80deg Less than 80deg
Type B - Less than 85deg Less than 85deg

*1:(U) Maximum working voltage
*2:(Basic isolation/Reinforced isolation)
*3:Listed voltage means working voltage.
*4:Listed voltage means working voltage in IEC60950-1, and rated input voltage in IEC60335.

2. IEC60335-1 compliance

(1) Creepage

Required creepage in IEC60335-1 is more strict than IEC60950-1 in some part.

(2) Temperature of wire

In IEC60950-1, type of wire is categorized by the absolute maximum temperature. In IEC60335-1, type of wire is categorized by the temperature increasing against temperature at 25ºC ambient temperature.

(3) Grounding capacitor

2pcs of Y1 grade grounding capacitors shall be used in series to comply with IEC60335-1.

(4) Safety approval

The creepage and temperature of wire are different depending on the product.

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
IEC Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere UL Probe Test IP Tester Test Equipment
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe