Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

What is a Test Probe B ?

Test Probe B (Test Finger Probe) to the action is used to simulate the human finger and palm, with its contact or if necessary to apply 10N force to contact the live parts of the device, in addition, in order to clearly determine whether the live parts are touched by the test finger, the test finger tail wire should also be connected to an output voltage of not less than 40V, but not greater than 50V electrical indicator, to display the test results. Judgment of test results: When using a live part of the test finger to disasso contact the appliance, the live part is touched if the indicator on the electrical indicator is on, and if the indicator is not on, the live part is not touched.

There are many standards that refer to Test Probe B, but the most original standards should be IEC 61032 and IEC 60529, which are one of the most important and commonly used test rods in laboratories such as electrical testing.

In addition, it is emphasized that the Test Probe B belongs to the IEC adult test finger, in addition, there are several kinds of children's test  finger, these are mentioned in the following article.

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe