Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

IP Probes, Fingers and Pins The Corresponding Standard

Description European standards Other standards
JOINTED TEST FINGER EN 60529 FIG. 1 
EN 61032 FIG. 2 
EN 60335-1 
EN 60335-1/A13
23-50 FIG. 21
IEC 60529 
IEC 61032 
IEC 884-1
JOINTED TEST FINGER EN 60335-2-64 Fig. 1  
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N EN 60950 
EN 60335-1
IEC 60335-1 Fig. 10
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N    
RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N EN 61032 Fig. 7 IEC 60065 Fig. 3b
SHORT TEST PIN EN 61032 Fig. 9 
EN 60335-1 
EN 60601-1
IEC 60335-1 Fig. 2
LONG TEST PIN EN 61032 IEC 61032
TEST MANDREL EN 61032 Fig. 16 
EN 60335-1
IEC 60335-1 Fig. 3
TEST NEEDLE Ø 1 mm , force 1 N CEI 23-50 Fig. 10 IEC 883
TEST NEEDLE Ø 2, 5 mm , force 3 N    
SHORT CIRCUIT TESTER, 48 V. with signal light EN 60335-1 par. 8.1 IEC 60529 par. 11.89 
IEC 60598-1 par. 6.92
TEST SPHERE Ø 50 mm with handle EN 60529 
EN 61032 Fig. 1
IEC 60529 
IEC 61032
TEST NAIL to be applied to the rigid test finger EN 60335-1 Fig. 7 IEC 60335-1 Fig. 7
TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529 
EN 61032 Fig. 3
IEC 60529 
IEC 61032
TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529 
EN 61032 Fig. 4
IEC 60529 
IEC 61032
TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N EN 60950 Fig. 16 IEC 61010- par. 8.1.1
SMALL FINGER PROBE Ø 8, 6 mm EN 61032 Fig. 12 
EN 60335-2-75
 
SMALL FINGER PROBE ? 5, 6 mm EN 61032 Fig. 13 
EN 60335-2-75
IEC61032 IEC60065
ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS EN 61032 CEI IEC 61032, FIG. 14 – PROBE 31
TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG EN61032 IEC 61032 FIG17 PROBE43
TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG EN61032 IEC 61032 FIG10 PROBE14
TEST NEEDLE Ø 0.5 MM, 20MM LONG EN61032 IEC 61032 FIG11 PROBE17
"UL" FINGER PROBE   ACCORDING TO UL 1026,
FIG. 6.2 ,UL508 ,FIG.6.4,
UL153,FIG23.1;UL 982, 
FIG. 7.1 UL507 FIG9.2, 
UL1310-1994
HAZARDOUS MOVING PARTS PROBE   UL507 FIG8.1, PA160B
RIGIDITY TEST ROD PROBE,Ø 25.4 MM   UL507 FIG8.2 S2140A
UNINSULATED LIVE PARTS PROBE   UL507 FIG1.1
TACCESSIBILITY PROBE/WEDGE   UL 60950-1, FIG. NAF.2, FIG. NAF.3
BLUNT-END PROBE   UL1310 FIG14.4(S3252)
ENAMELED WIRE PROBE   UL1278 FIG 8.2(PA140A),UL398 
FIG 8.2(PA170B) ,UL507(PA170D)
TEST HOOK   CEI EN 60601-1, 
FIG. 1 UL 6500, FIG. 8.2
ULTEST FINGER    
UL TEST PROBE   UL1287 FIG,10.1
UL TEST PROBE   UL1287 FIG,10.2
UL TEST PROBE   UL1287 FIG,10.3
UL TEST PROBE   UL1287 FIG,10.4
JOINTED IEC TEST FINGER   IEC6 0335-2-14
JOINTED IEC TEST FINGER (Ø 125MM)    
TEST PROBE PROBE32   IEC61032
IEC STEEL ROD Ø 4 MM, 100 MM LONG EN61010-1 EC60065 9.1.3, IEC1010
IEC STEEL ROD Ø 3 MM, 100 MM LONG EN61010-1,CSA1010-1 IEC1010, ,UL31010-1
TEST PORBE ABOUT IEC60950   IEC60950
TEST PORBE ABOUT IEC60601   IEC60601
TEST PORBE ABOUT IEC61010   IEC61010
TEST PORBE ABOUT IEC60335   IEC60335
TEST PORBE ABOUT IEC60529   IEC60529

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
IEC Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere UL Probe Test IP Tester Test Equipment
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe