Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

IEC60320 Gauge for Plug & Pin List

Application:
Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.
 
Conforms To:
IEC60320
 
Specification:
Standard
Product Name
IEC60320-1-Figure 2 "Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure4 "Go" gauge for connectors to standard sheet C5
IEC60320-1- Figure5 "Go" gauge for connectors to standard sheet C7
IEC60320-1- Figure5A "Go" gauge for side-entry connectors to standard sheet C7
IEC60320-1- Figure6 "Not Go" gauge for connectors to standard sheet C1
IEC60320-1- Figure7 "Not Go" gauge for connectors to standard sheet C1,C5 and C7
IEC60320-1- Figure8 "Not Go" gauge for connectors to standard sheet C1 and C7
IEC60320-1- Figure9 "Not Go" gauge for appliance inlets to standard sheet C8,C8A and C8B
IEC60320-1- Figure9A "Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9B "Not Go" gauge for connectors to standard sheet C9
IEC60320-1- Figure9C "Go" gauge for appliance inlets to standard sheet C10
IEC60320-1- Figure9F "Go" gauge for connectors to standard sheet C13
IEC60320-1- Figure9G "Not Go" gauge for connectors to standard sheet C13 and C17
IEC60320-1- Figure 9H "Go" gauge for appliance inlets to standard sheets C14, C16 AND C18
IEC60320-1- Figure 9J "Go" gauge for connectors to standard sheet C15
IEC60320-1- Figure 9K "Go" gauge for connectors to standard sheet C17
IEC60320-1- Figure 9L "Go" gauge for connectors to standard sheet C19
IEC60320-1- Figure 9M "Go" gauge for appliance inlets to standard sheet C20 and C24
IEC60320-1- Figure 9N "Go" gauge for connectors to standard sheet C21
IEC60320-1- Figure 9P "Go" gauge for appliance inlets to standard sheet C22
IEC60320-1- Figure 9Q "Go" gauge for appliance inlets to standard sheet C23
IEC60320-1- Figure 9R "Not Go" gauge for connectors to standard sheet C13,C15 and C17
IEC60320-1- Figure 9S "Go" gauge for connectors to standard sheet C15A
IEC60320-1- Figure 9T "Go" gauge for appliance inlets to standard sheet C16A
IEC60320-1- Figure 22 Blades for checking the resisitance against deformation of the front part of the connector to standard sheet C7
IEC60320-1- Figure 27 Gauges for checking the distance form the engagement face of connectors to the point of first contact

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe