Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

AS/NZS 3112 Gauge for Plug & Pin List

Application:

Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 53-58 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.

Conforms To:

AS/NZS 3112

Specification:
Standard
Product Name
AS/NZS3112 FigureA1 Rating and Dimensions of low voltage plugs gauge Fig A1 (10A, 15A, 20A)
AS/NZS3112 Figure B1 Rating and Dimensions of low voltage plugs gauge Fig B1
AS/NZS3112 Figure C1 During normal insertion test plug in Fig C1(10A,15A,20A)
AS/NZS3112 Figure D1 During normal insertion test plug in Fig D1(10A,15A,21A)
AS/NZS3112 Figure E1 Current breaking test /Test of temperature rise test plug with brass pins in Fig E1
AS/NZS3112 Figure F1 a Rating and Dimensions of low voltage plugs gauge Fig F1(a) Appendix F
AS/NZS3112 Figure F1 b Rating and Dimensions of low voltage plugs gauge Fig F1(b) Appendix F
AS/NZS3112 Figure G1 a During normal insertion test plug in Fig G1(a) of Appendix G
AS/NZS3112 Figure G1 b During normal insertion test plug in Fig G1(b) of Appendix G
AS/NZS 3112 figure 3.1 abc Depth of contact No-contact gauge in Fig 3.1 a b c
AS/NZS 3112 figure 3.1 abc clause 3.3.4 Depth of contact Contact gauge in Fig 3.1 a b c
AS/NZS 3112 figure 3.1 a Contact gauge in Fig 3.1 a (metal blade 1.58x6.2mm,length 12.60mm)
AS/NZS 3112 figure 3.1 b Contact gauge in Fig 3.1 b (metal blade 1.58x8.93mm,length 12.60mm)
AS/NZS 3112 figure 3.1 c Contact gauge in Fig 3.1 c (metal pin: Ф4.7mm,length 12.60mm)
AS/NZS 3112 figure 3.6 Test of lateral strain gauge Fig 3.6
AS/NZS 3112 figure 3.7 Test of lateral strain gauge Fig 3.7
AS/NZS 3112 figure 2.1 a1 Test plug with brass pins in Figure 2.1(a1)10A
AS/NZS 3112 figure 2.1 a1 Test plug with brass pins in Figure 2.1(a1)15A
AS/NZS 3112 figure 2.1 a2 Test plug with brass pins in Figure 2.1(a2)
AS/NZS 3112 figure 2.1 b Test plug with brass pins in Figure 2.1(b)
AS/NZS 3112 figure 2.1 c Test plug with brass pins in Figure 2.1(c)
AS/NZS 3112 figure 2.1 d1 Test plug with brass pins in Figure 2.1(d1)
AS/NZS 3112 figure 2.1 d2 Test plug with brass pins in Figure 2.1(d2)
AS/NZS 3112 figure 2.1 f Test plug with brass pins in Figure 2.1(f)
AS/NZS 3112 figure 2.1 g Test plug with brass pins in Figure 2.1(g)
AS/NZS 3112 Clause 3.3.2 Test pin gauge 1.5N 6.20mm x 1.58mm
AS/NZS 3112 Clause 3.3.2 Test pin gauge 2N 6.20mm x 1.58mm
AS/NZS 3112 Clause 3.3.2 Test pin gauge 3N 6.20mm x 1.58mm
AS/NZS 3112 Figure 2.1 Test Jig
AS/NZS 3112 Clause 2.13.8 Wooden mounting box in Figure 2.9
AS/NZS 3112 Clause 2.13.8 Pin clamping unit in Figure 2.10 a, b, c
AS/NZS 3112 Clause 3.6.3 modified gauge of Appendix D (diameter changed to 43.2mm)
AS/NZS 3112 Clause 3.14.2 metallic enclosure H90mm x W60mm xD40mm with fixing hole
AS/NZS 3112 Clause 2.2.3 Form of pin in Figure 2.3

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe