Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

UL498 Gauge for Plug & Pin List

Application:
Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.
 
Conforms To:
UL498
 
Specification:
Standard
Product Name
Remark
UL498 Figure 9.1
articulate probe with web stop  
UL498 Figure 10.1
probe  
UL498 Figure 31.1
flat probe  
UL498 Figure 69.1
reference plug  
UL498 Figure 94.1
impoper insertion test blades Set of two
UL498 Figure 105.1
test plug Set of two
UL498 Figure 105.2
test blade  
UL498 Figure 118.1
receptacle test fixture  
UL498 Figure 118.3
push out tool  
UL498 Figure 118.5
bridge  
UL498 Figure 119.1
test pin A  
UL498 Figure 119.2
test pin B  
UL498 Figure 119.3
57g ground pin  
UL498 Figure 119.4
113g ground pin  
UL498 Figure 129.2
No.14 AWG test pin  
UL498 Figure 132.1
test probe  
UL498 Figure 132.2
test probe  
UL498 Figure 144.2
fixture for assembly security test  
UL498 Figure SD13.2
over size ground pin  

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe