Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

E27 Lamp Gauge List

Application:
Chuangxin Instruments offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 52 HRC and a roughness according to standard require. Each gauge is supplied with a certificate of calibration.
 
Conforms To:
IEC60968-1, IEC60061-3
 
Specification:
Standard
           Product Name
IEC60061-3,7006-27B-1 "Go"gauges for E27 caps on finished lamps
IEC60061-3,7006-28A-1 "Not Go"gauges for E27 caps on finished lamps
IEC60061-3,7006-50-1 Gauge for finished lamps fitted with E27 caps for testing contact making
IEC60061-3,7006-51A-2 Gauge for E27 caps on finished lamps for testing port. Against acc. Contact during insertion
IEC60061-3,7006-51-2 Gauge for caps on finished lamps for testing port. Against acc. Contact E27 51*39
IEC60061-3,7006-27C-1 "Go"gauges for dimension "S1" of E27 caps on finished lamps
IEC60061-3,7006-25A-2 E27 "GO “gauge for lampholders
IEC60061-3,7006-26-4 E27"Not Go"plug gauge for screw threads of lampholders
IEC60061-3,7006-21-5 E27 Gauge for testing port. Against bulb-neck damage and for testing contract making in lampholders
IEC60061-3,7006-22A-4 E27 Gauge for testing contact making and port. Against acc. Contact during insertion
IEC60061-3,7006-22B-1 E27 Gauge for detecting side-contacts with cutting-edges
IEC60061-3,7006-22C-1 E27 Gauge I. for testing resilience of side contact
IEC60061-3,7006-22D-1 E27 Gauge II. for testing resilience of side contact
IEC60238 Fig 11 E27 Test Cap for temperature test 14.4 and 19.3 of IEC60238
IEC60238 Fig 5 E27 Test Cap for torque test clause 18 of IEC60238
IEC60238 Fig 14 E27 Test Cap for resistance to heat test clause 19 of IEC60238
 

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe