Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

The All Products Corresponding Standard

Description Standards
Jointed Test Finger IEC/CEI EN 61032
IEC/CEI EN 60884-1
IEC/CEI EN 60529
CEI 23-50
Jointed Test Finger With Lenght Of 100 mm IEC/CEI EN 60335-2-64
Jointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N IEC/CEI EN 61032
IEC/CEI EN 60884-1
IEC/CEI EN 60529
CEI 23-50
IEC/CEI EN 60335-1
Jointed Test Finger With Insulated Disc ø 125 mm IEC/CEI EN 60335-2-14
Jointed Test Finger With Insulated Cylinder ø 50 mm IEC/CEI EN 60335-1
Unjointed Test Finger with Insulated Part and Dynamometric Handgrip with and Reference Marks To Forces of 10-20-30-40-50 N IEC/CEI EN 60950
IEC/CEI EN 60335-1
Unjointed Test Finger with Dynamometric Handgrip and Reference Marks to Forces Of 10-20-30-40-50 N IEC/CEI EN 60065
IEC/CEI EN 61032
Unjointed Test Finger With Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50-75 N IEC/CEI EN 60065
IEC/CEI EN 61995-1
IEC/CEI EN 61032
Short Taper Test Pin ø 3 To 4 Mm – Length 15 mm IEC/CEI EN 60601-1
IEC/CEI EN 61032
IEC/CEI EN 60335-1
Test Cone IEC/CEI EN 61032
IEC/CEI EN 60335-1
Gauge ø 1 mm, Force Of 1 N, for Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Gauge ø 2,5 mm, Force Of 3 N, For Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Test Sphere ø 50 mm with Handle and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Finger Nail IEC/CEI EN 60335-1
Test Rod ø 2,5 mm, Length 100 mm, With Stop Sphere ø 35 mm and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Rod ø 1 mm, Length 100 mm, with Stop Sphere ø 35 mm and Contact Cable IEC/CEI EN 61032
IEC/CEI EN 60529
Test Probe ø 12 mm, Length 80 mm with Dynamometric Handgrip and Reference Marks To Forces Of 10-20-30-40-50 N IEC/CEI EN 60950
IEC/CEI EN 61010-1
Small Finger Probe ø 8,6 mm EN 71-1
IEC/CEI EN 60335-2-75
IEC/CEI EN 61032
Small Finger Probe ø 5,6 mm IEC/CEI EN 60601-1-11
EN 71-1
IEC/CEI EN 60335-2-75
IEC/CEI EN 61032
Flat Gauge From 3x1 mm, Force Of 20 N, for Checking Non-Accessibility Of Live Parts IEC 62196-1
IEC/CEI EN 60884-1
CEI 23-50
Test Pin ø 1 mm, Length 20 mm UL 6500
BS 1363-2
IEC/CEI EN 60065
BS 1363-1
Long Test Pin ø 4 mm, Length 50 mm IEC/CEI EN 60335-2-6
IEC/CEI EN 61032
TEST PROBE Ø 12,7 mm, Length 80 mm with Dynamometric Handgrip And Reference Marks To Forces Of 50-60-70-80-90-100 N UL 197
Test Knife with Dynamometric Handgrip And Reference Marks To Forces Of 5 Pounds UL 244 A
UL 749
Test Probe for Food Waste Disposal Units IEC/CEI EN 61032
“UL” Jointed Test Finger UL 60950
UL 1083
UL 982
UL 73
UL 873
Test Probe for Fan Blades CSA C22.2 No. 113-08
UL 471
Test Probe ø 9,5 mm, Length 101,6 mm for Accessibility Determination UL 471
Test Probe ø 12,7 mm, Length 101,6 mm for Film-Coated Wire UL 325
UL 484
CSA C22.2 No. 195
UL 471
Test Hook UL 6500
IEC/CEI EN 60601-1
Wedge Probe IEC/CEI EN 60950
UL 60950
Test Probe ø 6,4 mm for Hand-Supported Enclosure UL 763
Test Pin Dia. 4x100 mm for Accessibility Tests IEC/CEI EN 61010-1
Test Probe for Uninsulated Live Parts UL 325
UL 507
Test Probe ø 75 mm with An Hemispherical End IEC/CEI EN 60335-2-6
Test Probe To Verify The Accessibility On Flatirons UL 1005
Test Rod Diam. 8 mm, Length 150 mm IEC/CEI EN 60335-2-64
IEC/CEI EN 60335-2-14
Test Probe ø 40 mm with An Hemispherical End IEC/CEI EN 60335-2-54
IEC/CEI EN 60335-2-64
IEC/CEI EN 60335-2-14
Small Test Probe UL 498
Large Test Probe UL 498
Probe Intended for Use With Lamp Rated 600 V. or Less UL 496
Test Bar From 50x5 mm IEC/CEI EN 61032
Test Rod ø 0,5 mm, Length 90 mm IEC/CEI EN 61032
Test Rod ø 25 mm, Length 150 mm IEC/CEI EN 61032
Test Probe ø 100 mm with An Hemispherical End IEC/CEI EN 60335-2-27
Probe Intended for Use With Lampholder Rated Between 600 V. and 1000 V. UL 496
CSA C22.2 N° 43-08
Puncture Probe UL 325
Probe for Table Mounted and Handheld Appliances ø 6,3 mm CSA C22.2.195
Probe for Table Mounted and Handheld Appliances ø 12,5 mm CSA C22.2.195
Test Cone UL 1278
Test Rod for Interlock Concealment IEC/CEI EN 60335-2-25
IEC/CEI EN 60335-2-90
Impact Test Apparatus IEC/CEI EN 60335-2-92
IEC/CEI EN 60335-2-107
IEC/CEI EN 60335-2-67
Ball Pressure Test Device IEC/CEI EN 60335-10-2
IEC/CEI EN 60309-1
CEI 23-50
IEC/CEI EN 60669-1
IEC/CEI EN 60884-1
CEI EN 50083-1
IEC/CEI EN 60335-1
IEC/CEI EN 60320-1
IEC/CEI EN 60598-1
Glow Wire Test Apparatus IEC/CEI EN 60695-2-10
Needle Flame Test Apparatus IEC/CEI EN 60695-2-2
IEC/CEI EN 60695-11-5
Tracking Test Apparatus IEC/CEI EN 60112
Steel Sphere Diam. 50 mm for Impact Test IEC/CEI EN 60950
IEC/CEI EN 60335-2-91
IEC/CEI EN 60335-2-90
IEC/CEI EN 60439-4
Steel Sphere Diam. 50,8 mm for Impact Test IEC/CEI EN 60335-2-69
IEC/CEI EN 60335-2-72
IEC/CEI EN 60335-2-68
IEC/CEI EN 60335-2-67
UL 325
Steel Sphere Diam. 40 mm for Impact Test IEC 61721
Steel Sphere Diam. 75 mm for Accessibility Test IEC/CEI EN 60335-2-24
IEC/CEI EN 60335-2-89
Steel Sphere Diam. 100 mm for Impact Test EN 356
IEC/CEI EN 60335-2-91
Dielectric Strength Test Instrument IEC/CEI EN 60065
Hand-Held Device to Verify Protection Against Spraying and Splashing Water (Spray Nozzle) – IPX3 and IPX4 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Water Jets (Hose Nozzles) – IPX5 and IPX6 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Test Device To Verify Protection Against Spraying and Splashing Water (Oscillating Tube) – IPX3 and IPX4 Degrees ISO 26053
DIN 40050
IEC/CEI EN 60529
IEC/CEI EN 60068-2-18
Load for Testing Rotating Spits IEC/CEI EN 60335-2-9
IEC/CEI EN 60335-2-6
Test Corner for Heating Test IEC/CEI EN 61010-1
IEC/CEI EN 60335-1
UNI CIG 7166
IEC/CEI EN 60601-1
EN 613
EN 30-1-1
Pans for Testing On Gas Burners EN 30-1-1
Foot Probe UNI EN 836
IEC/CEI EN 60335-2-2
DIN 1856
EN 13684

 


    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe