Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

All Products

CAT. NO. DESCRIPTION
LX-2094MI MULTITESTER
LX-DV-20 WATER DISTILLER (20l/h)
LX-DV-8 WATER DISTILLER (8l/h)
LX-KK-3500 CLIMATIC CHAMBER 3552 L (1200x1600x1850 mm), 10°C to + 70 °C, RH 30 to 95 %
LX-KK1000 CLIMATIC CHAMBER 1000 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK1000 CHL CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -30°C to + 100 °C, RH 10 to 95 %
LX-KK1000 CHLT CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -75°C to + 180 °C, RH 10 to 98 %
LX-KK1000CH CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -45 °C to 120 °C, RH 15 to 97 %
LX-KK105 CLIMATIC CHAMBER 105 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK1440CH CLIMATIC CHAMBER 1440 L (1000x1200x1200 mm), 10°C to + 180 °C, RH 10 to 95 %
LX-KK190 CLIMATIC CHAMBER 190 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK190LT CLIMATIC CHAMBER 190 L, EXTENDED TEMP RANGE, -75°C to + 180 °C, RH 15 to 95 %
LX-KK2000CH CLIMATIC CHAMBER 2000 L (1050 x 1200 x 1600 mm), -40°C to + 150 °C, RH 10 to 98 %
LX-KK265 CLIMATIC CHAMBER 252 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK4075 CLIMATIC CHAMBER 4075 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK500 CLIMATIC CHAMBER 495 L, 5°C to + 95 °C, RH 15 to 95 %
LX-KK600L TEMPERATURE AND HUMIDITY CHAMBER 612 L, T= -40..90 deg C, % RH 10..95%
LX-KKXX CLIMATIC CHAMBERS
LX-OB-7/2 CALIBRATION BATH 7L (LX-TCW +8°C to 250°C +/- 0,02 °C, ID100 mm x 230 mm)
LX-OB-7/2H CALIBRATION BATH 7L (LX-TCW -40°C to 130°C +/- 0,02 °C, ID100 mm x 230 mm)
LX-SP105 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
LX-SP105C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
LX-SP1200CK TEMPERATURE CHAMBER 1200 l , 0°C to 300 °C
LX-SP120E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 120 L
LX-SP1300C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 1288 L
LX-SP160 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
LX-SP160C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
LX-SP190 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
LX-SP190C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
LX-SP210 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
LX-SP210C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
LX-SP240E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 240 L
LX-SP250 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
LX-SP250C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
LX-SP25E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 25 L
LX-SP265 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
LX-SP265C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
LX-SP440 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
LX-SP440C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
LX-SP45 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
LX-SP45C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
LX-SP55E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 55 L
LX-SP910C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 910 L
LX-SPXXE HEATING CHAMBERS WITH FORCED CONVECTION - EASY
LX-T1-02 HEATING DEVICE
LX-T1-04 HEATING DEVICE CONTROLLER
LX-T1-11 FUME CUPBOARD (PROTECTIVE CABINET, TEST CHAMBER) 850 l
LX-T1-12 FUME CUPBOARD (PROTECTIVE CABINET) 1000 x 1000 x 1500 mm
LX-T1-13 DUST CHAMBER 3 m3
LX-T1-14 FUME CUPBOARD 0,5 m3
LX-T1-15 DUST CHAMBER 800x800x900 mm
LX-T1-16 DUST CHAMBER 2000x1000x1000 mm
LX-T1-17 DUST CHAMBER 1000x1000x1000 mm
LX-T1-18 DUST CHAMBER 1400x700x700 mm
LX-T1-19 DRIP BOX 700 x 700 mm
LX-T1-20 DRIP BOX 500 x 500 mm
LX-T1-21 DRIP BOX 500 x 1000 mm
LX-T1-23 WATER SUPPLY UNIT FOR DRIP BOX
LX-T1-25 TURNTABLE FOR DRIP BOX
LX-T1-26 TUBE FOR LX-SPRAY APPARATUS, R 200, ?60, ?90°
LX-T1-27 TUBE FOR LX-SPRAY APPARATUS, R 400, ?60, ?90°
LX-T1-28 TUBE FOR LX-SPRAY APPARATUS R 600 ?60,?90°
LX-T1-29 TUBE FOR LX-SPRAY APPARATUS, R 800, ?60, ?90°
LX-T1-30 TUBE FOR LX-SPRAY APPARATUS, R 1000, ?60, ?90°
LX-T1-32 MOTOR DRIVE FOR LX-SPRAY APPARATUS
LX-T1-35 TELESCOPE SUPPORT 270x180
LX-T1-36 LX-SPRAY NOZZLE
LX-T1-37 WALL ELECTROLIFT FOR DRIP BOX
LX-T1-40 WALL CARRIER FOR DRIP BOX (700x700) (h=4000mm)
LX-T1-41 WATER JET HOSE NOZZLE DIA. 6,3 mm
LX-T1-42 WATER JET HOSE NOZZLE DIA. 12,5 mm
LX-T1-43 LX-SPLASH NOZZLE (IEC 60335-2-64, 60335-2-58, Fig. 101)
LX-T1-45 JET TEST SET
LX-T1-51 DUST CHAMBER WxDxH 700X1100x600 mm
LX-T1-55 DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2x2x2 m (IEC 60598-1, Annex D)
LX-T1-56 DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2,5x1,8x3 m (IEC 60598-1, Annex D)
LX-T1-59 TEST ENCLOSURE FOR MEASUREMENT OF SMOKE DENSITY OF CABLES 3x3x3m (IEC 61034-1)
LX-T1-60 APPARATUS FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16 (INSUL. SHROUD)
LX-T1-61 APP. FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16A (INSUL. SHROUD)
LX-T1-62 APP. FOR HEATING TEST WITH 4 - 16 A SURFACE-MOUNTED APPLIANCE INLETS C22 (METAL SHROUD)
LX-T1-63 POWER REGULATOR FOR LX-T1-65
LX-T1-65 WATER EVAPORATION APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. BB.1)
LX-T1-66 WATER LX-SPILLAGE APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. 101)
LX-T1-71 TUBE FOR LX-SPRAY APPARATUS, R 1200, ?60, ?90°
LX-T1-75C PROGRAMMABLE WALK IN CHAMBER 3x3x3m t - 40 °C to + 90 °C , 15% to 95% RH
LX-T1-76 PLYWOOD TEST CABINET 500 × 500 × 500 mm (IEC 60400 Cl. 17.1)
LX-T1-77 CHAMBER FOR WATER TESTS IPX1-4 WITH DRIP BOX (500x500mm), OSCILLATING TUBE (R200) AND TURNTABLE
LX-T1-77A WATER DISTILLER WITH PUMP FOR CLEANING THE LX-T1-77 AFTER TESTING
LX-T1-77B SYSTEM FOR WATER RECYCLING OF LX-T1-77
LX-T1-78 HEATING ENCLOSURE FOR THERMALLY PROTECTED BALLASTS (IEC 61347-1)
LX-T1-79 TEST CHAMBER FOR MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS 3x3x3m (IEC 61034-1, 60331-11)
LX-T2-01 TUMBLING BARREL h=350mm
LX-T2-02 TUMBLING BARREL h=500 mm
LX-T2-04 TUMBLING BARREL
LX-T2-04A BARREL OF LX-T2-04
LX-T2-06 PENDULUM IMPACT TEST APPARATUS - MECHANISM
LX-T2-07 MOUNTING DEVICE FOR IMPACT TEST m 10kg, 175 x 175
LX-T2-08 MOUNTING DEVICE FOR IMPACT TEST DIA. 175
LX-T2-10 BRAKE FOR LX-T2-11 WITH FASTENING DEVICE
LX-T2-100 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
LX-T2-101 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
LX-T2-102 DEVICE FOR CHECKING THE SIDE EARTHING CONTACTS (VDE 0620-1 F. 43)
LX-T2-103 G13 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
LX-T2-104 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (NEN 1020)
LX-T2-105 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (NEN 1020)
LX-T2-11 TORSION APPARATUS 4 Nm
LX-T2-12 BENDING APPARATUS FOR LAMPHOLDERS (IEC 60238 Fig. 12)
LX-T2-13 DEVICE FOR WITHDRAWAL FORCE MEASURING
LX-T2-14 APPARATUS FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE
LX-T2-15 PRESSURE APPARATUS (IEC 60238, Fig. 9)
LX-T2-16 APPARATUS FOR PRESSURE TEST ON SHROUDS (IEC 60320-1, F. 20)
LX-T2-17 APPARATUS FOR PULLING TEST (IEC 60320-1, F. 19)
LX-T2-18 APP. FOR TESTING THE CORD RETENTION
LX-T2-19 IMPACT APP. FOR GRIPPING LUGS
LX-T2-20 APPARATUS FOR TESTING CORD RETENTION (IEC 60884-1, Fig. 20)
LX-T2-21 IMPACT WEIGHT APPARATUS
LX-T2-22 INTERMEDIATE PE FOR LX-T2-21 FOR LOW TEMP. TEST
LX-T2-23 INTERMEDIATE PE FOR LX-T2-21 FOR PIN INSULATING SLEEVES
LX-T2-25 SLIDING WEIGHT 100 g FOR LX-T2-21
LX-T2-28 SLIDING WEIGHT 250 g FOR LX-T2-21
LX-T2-34 SLIDING WEIGHT 1000 g FOR LX-T2-21
LX-T2-40 AXIAL PULL TEST APPARATUS (IEC 60127-2, Fig. 7)
LX-T2-41 TEST FUSE BASE I max.10A (IEC 60127-2, Fig. 1)
LX-T2-42 TEST FUSE BASE I > 10A (IEC 60127-2, Fig. 2)
LX-T2-43 TEST FUSE BASE FOR BREAKING CAPACITY (IEC 60127-2, Fig. 3)
LX-T2-44 MECHANICAL SHOCK TEST APPARATUS (IEC 60898-1)
LX-T2-45 BUMP TEST APPARATUS 1000 x 600 mm, IEC 60065
LX-T2-46 PENDULUM IMPACT - TEST APPARATUS-POLYAMIDE HAMMER 150g
LX-T2-47 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 150g
LX-T2-48 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 250g
LX-T2-49 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 500g
LX-T2-50 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 1500g
LX-T2-51 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 5000g
LX-T2-52 MOUNTING BLOCK FOR FLUSH TYPE EQUIPMENT
LX-T2-53 TRIGGER FOR HAMMERS LX-T2-49, LX-T2-50 and LX-T2-51
LX-T2-54 TORSION APPARATUS 20 Nm
LX-T2-58 TORSION APPARATUS 0.5 Nm (IEC 60335-1, 60950-1)
LX-T2-59 ARRANGEMENT FOR MECHANICAL STRENGTH TEST ON MULTIPLE PORTABLE SOCKET-OUTLETS (IEC 60884-1, BS 1363-2)
LX-T2-60 PENDULUM IMPACT-TEST APPARATUS-POLYAMIDE HAMMER 250g
LX-T2-63 TUMBLING BARREL h=500 mm (IEC60068-2-32)
LX-T2-64 ARRANGEMENT FOR COMPRESSION TEST OF 24.5 (150 N, 300 N) (IEC 60884-1, FIG. 8, Cl. 10.1)
LX-T2-65 APPARATUS FOR TESTING SCREW-TYPE&nbLX-SP;TERMINALS (IEC 60884-1, Fig. 11)
LX-T2-66 APPARATUS FOR TESTING DURABILITY OF MARKINGS ON RATING LABELS
LX-T2-69 ARRANGEMENT FOR CHECKING DAMAGE TO CONDUCTORS (IEC 60884-1, Fig. 11)
LX-T2-70 INCLINED PLANE 1000 x 1000 mm
LX-T2-71 TILTED SUPPORT FOR IPX2 TEST 500 x 500
LX-T2-72 APPARATUS FOR WINDING A FLEXIBLE PIPE
LX-T2-73 APPARATUS FOR CHECKING SECURITY OF LAMPHOLDER CONTACTS
LX-T2-74 CORD ANCHORAGE TORQUE DEVICE
LX-T2-76 DEVICE FOR MEASURING THE CONTACT PRESSURE OF EARTHING CONTACTS OF 10/16A 250 V TWO-POLE SOCKET-OUTLETS WITH SIDE EARTHING-CONTACTS (F. 23, CEE 7, VDE 0620-1 F. 14)
LX-T2-77 PLUG PIN DEFLECTION TEST APPARATUS FOR RESILIENT PLUGS (BS 1363-1, Fig. 8, Cl. 12.12)
LX-T2-78 APPARATUS FOR MECHANICAL STRENGTH TEST ON RESILIENT COVERS WITH HARDWOOD BLOCK (BS 1363-1, Cl. 9, Fig. 2a, 2b)
LX-T2-79 APPARATUS FOR TESTS ON PLUG PINS (BS 1363-1, Fig. 32, Cl. 12.9.4)
LX-T2-80 APPARATUS FOR TORSION TEST ON PINS (BS 1363-1, Fig. 33, Cl. 12.9.6)
LX-T2-81 APPARATUS FOR PULL TEST ON BS PLUGS (100N, W/MOUNTING PLATE) (BS 1363-1, Fig. 7, Cl. 12.11.1)
LX-T2-82 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (SSA 444, IEC 60884-1)
LX-T2-83 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
LX-T2-84 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
LX-T2-85 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (SMALL SSA 444, IEC 60884-1)
LX-T2-86 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (LARGE SSA 444, IEC 60884-1)
LX-T2-87 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
LX-T2-88 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
LX-T2-89 BUMP TEST APPARATUS 1500 x 1000 mm, 100 kg, IEC 60065
LX-T2-91 G5 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
LX-T2-92 FIXTURE FOR THE TESTING OF LAMPHOLDER FLEXIBILITY (IEC 60400, Fig. 3)
LX-T2-93 TUMBLING BARREL h=500 mm (BS 1363-1, Fig. 20)
LX-T2-94 APPARATUS FOR CHECKING THE STABILITY OF SIDE EARTHING CONTACTS (VDE 0620-1 F. 15)
LX-T2-95 TEST PLUG 16 A (VDE 0620-1 F. 16A)
LX-T2-96 TEST PLUG 3-PHASE 16 A (VDE 0620-1 F. 16b)
LX-T2-97 TEST PLUG 3-PHASE 25 A (VDE 0620-1 F. 16c)
LX-T2-98 TEST PLUG 2,5 A (VDE 0620-1 F. 16d)
LX-T2-99 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
LX-T3-01 EARTH BOND RESISTANCE TESTER 12 (6) V a.c., I max. 33A
LX-T3-04 APP. FOR SOCKET-OUTLETS BREAKING CAP. AND NORMAL OP. TEST
LX-T3-05 SURGE TEST APPARATUS
LX-T3-06 TEST CIRCUIT A FOR SWILX-TCHES
LX-T3-07 TEST CIRCUIT FOR SWILX-TCHES 200 A
LX-T3-08 TEST CIRCUIT FOR SWILX-TCHES 80 A
LX-T3-09 TEST CIRCUIT FOR SWILX-TCHES
LX-T3-10 APPARATUS FOR CIRCULAR AND ANGULAR MOVEMENTS
LX-T3-12 APPARATUS FOR NORMAL OPERATION TEST OF LAMPHOLDERS (FOR USE WITH LX-T3-10)
LX-T3-13 CABLE FLEXING APPARATUS
LX-T3-15 APPARATUS FOR AUTOMATIC REEL CORD TESTING
LX-T3-20 APPARATUS FOR FLEXING TEST (IEC 60884-1, BS 1343-1)
LX-T3-25 APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (IEC 320)
LX-T3-26 APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (DOUBLE SIDED, IEC 320)
LX-T3-27 APP. FOR SOCKET-OUTLETS BREAK. CAP. AND NORMAL OP. TEST (DOUBLE SIDED, IEC 884-1)
LX-T3-30 ADDITIONAL PARTS FOR LX-T3-10 FOR TOASTERS FLEXING TEST
LX-T3-44 PROBE FOR MEASURING SURFACE TEMPERATURE (IEC 60335-2-6)
LX-T3-53 TIMER WITH THERMOMETER
LX-T3-53A THERMOCOUPLE WITH THE COPPER BLOCK Dia. 4 mm (IEC 60695-11-5, 60335-1, 60959-1)
LX-T3-53B THERMOCOUPLE WITH THE COPPER BLOCK Dia. 9 mm (IEC 60695-11-3, ASTM D 5027)
LX-T3-53C THERMOCOUPLE WITH THE COPPER BLOCK Dia. 5,5 mm (IEC/TS 60695-11-4, ASTM D 5027)
LX-T3-54A FLAME HEIGHT GAUGE (IEC 60695-11-5, 60335-1, 60959-1)
LX-T3-54B FLAME HEIGHT GAUGE (IEC/TS 60695-11-3)
LX-T3-54C FLAME HEIGHT GAUGE (IEC/TS 60695-11-4)
LX-T3-54D CLEARANCE GAUGE (IEC/TS 60695-11-4)
LX-T3-61 IMPULSE GENERATOR 1,2/50 µs, 12 kV
LX-T3-62 IMPULSE GENERATOR 10/700 ?s, 6 kV (IEC 60950, 61180-1, 61180-2)
LX-T3-64 APPARATUS FOR NORMAL OPERATION TESTS OF SOCKET OUTLETS (BS 1363-2, Cl. 18)
LX-T4-03 BALL PRESSURE TEST APPARATUS
LX-T4-04 DEVICE FOR TESTING NON-SOLID PINS 100 N
LX-T4-07 GLOW WIRE TEST APPARATUS
LX-T4-07A THERMOCOUPLE FOR GLOW WIRE TEST APPARATUS
LX-T4-07B WIRE LOOP FOR GLOW WIRE TEST APPARATUS
LX-T4-07T TIMER FOR GLOW WIRE TEST APPARATUS
LX-T4-08 GLOW WIRE TEST APPARATUS
LX-T4-08A THERMOCOUPLE DIA. 0,5 mm FOR GLOW WIRE TEST APPARATUS
LX-T4-08B WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 0,5 mm)
LX-T4-08D SILVER FOIL 2 mm2 - 20 pcs.
LX-T4-08E THERMOCOUPLE DIA. 1 mm FOR GLOW WIRE TEST APPARATUS
LX-T4-08F WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 1 mm)
LX-T4-08G WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 0,5 mm)
LX-T4-08H WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 1 mm)
LX-T4-09 SOLDERABILITY TEST APPARATUS (IEC 60068-2-20/Test T: Test Ta Method 1, Test Tb Method 1A, 1B)
LX-T4-10 HIGH FREQUENCY LX-SPARK GENERATOR
LX-T4-18 APP. FOR PLUG PIN ABRASION (IEC 60884-1, BS 1363-1)
LX-T4-19 APPARATUS FOR COMPRESSION TEST FOR THE VERIFICATION OF RESISTANCE TO HEAT
LX-T4-20 ABRASION APPARATUS
LX-T4-22 POWER SUPPLY 12 kV DC, 2 mA
LX-T4-29 APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE
LX-T4-31 NEEDLE FLAME BURNER DIA. 0.5 mm (IEC 60695-11-5)
LX-T4-33 BUNSEN BURNER
LX-T4-34 BUNSEN BURNER FISH TAIL
LX-T4-36 MECHANISMUS FOR BURNING TESTS (VERT. AND HORIZ.)
LX-T4-37 NEEDLE FLAME TESTER
LX-T4-38 BURNER TEST SET
LX-T4-40 POWER SUPPLY FOR LX-T4-53
LX-T4-41 TRACKING TEST APPARATUS 600V
LX-T4-41A ELECTRODES FOR TRACKING TEST APPARATUS (PAIR)
LX-T4-41C NOZZLE FOR TRACKING TEST APPARATUS
LX-T4-41D DISTANCE GAUGE FOR TRACKING TEST APPARATUS
LX-T4-41E AMMONIUM CHLORIDE SOLUTION 1 l
LX-T4-41F CALIBRATED WEIGHTS M1 IN WOODEN BOXES, 1 g and 100 g WITH CERTIFICATES
LX-T4-42 TRACKING TEST APPARATUS (1000V)
LX-T4-47 APPARATUS FOR HIGH CURRENT ARCHING
LX-T4-50 ELECTRODE ARRANGEMENT 65
LX-T4-52 APPARATUS FOR HIGH-VOLTAGE LOW-CURRENT ARCHING
LX-T4-53 TEST FIXTURE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 3, IEC 60950-1)
LX-T4-54 WINDING DEVICE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 4, IEC 60950-1)
LX-T4-55 NiCr WIRE 80/20, DIA. 0.5 mm, 100 m FOR HOT WIRE IGNITION TEST (IEC 60695-2-20, IEC 60950-1)
LX-T4-56 ELECTRODE ARRANGEMENT for EN 50 028
LX-T4-57 MANDREL TEST APPARATUS (IEC 60950-1, Annex AA)
LX-T4-58 APPARATUS FOR SCRALX-TCHING COOLING SYSTEMS (IEC 60335-2-24, Fig. 102)
LX-T4-59 APPARATUS FOR TESTING RESISTANCE TO FLEXING AND ABRASION OF HOSES (IEC 60335-2-2, Fig. 101 and 102)
LX-T4-61 BURNER 1000W (IEC 60695-11-2)
LX-T4-62 GAS AND AIR SUPPLY UNIT FOR LX-T4-61 (FLOWMETERS ?2%)
LX-T4-63 GAS AND AIR SUPPLY UNIT FOR LX-T4-61 (FLOWMETERS ?4%)
LX-T4-64 METALLIC SCREEN WITH BURNER STAND (IEC 60332-1)
LX-T4-65 BURNER 50, 500 W (IEC 60695-11-4 A, IEC 60695-11-3 A)
LX-T4-66 GAS SUPPLY UNIT FOR LX-T4-65 and LX-T4-70 (ISO 9772, IEC 60695-11-3, 500W, FLOWMETER ?2%, VALVE AND MANOMETER)
LX-T4-67 GAS SUPPLY UNIT FOR LX-T4-65 (IEC 60695-11-4, 50W, FLOWMETER ?2%, VALVE AND MANOMETER)
LX-T4-69 APPARATUS FOR PRESSURE TEST (BS 1363-1, Fig. 23)
LX-T4-70 WING TOP BURNER (ISO 9772)
LX-T4-70A WING TOP FOR LX-T4-70 (ISO 9772) - LX-SPare part
LX-T4-71 SUPPORT GAUZE HOLDER (ISO 9772)
LX-T4-72 BURNER WITH VENTURI MIXER FOR BURNING CABLES 500 mm (IEC 60331-11)
LX-T4-73 GAS SUPPLY UNIT FOR LX-T4-72, LX-T4-61 (IEC 60331-11, IEC 60695-11-2, WITH MASS FLOWMETERS)
LX-T4-74 CABLE SUPPORTING ARRANGEMENT (IEC 60331-11)
LX-T5-00 GAUGE MAINTENANCE KIT
LX-T5-08 TEST CORNER 800 x 800 x 1200 mm, 480 THERMOCOUPLES
LX-T5-101 GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWS (IEC 60238, Fig. 3)
LX-T5-102 E14 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
LX-T5-103 E27 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
LX-T5-104 E40 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
LX-T5-105 E27 GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES (7006-22B-1)
LX-T5-106 E27 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-21-5)
LX-T5-11 E14 TEST CAP FOR TORQUE TESTS
LX-T5-110 E14 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING CONTACT MAKING (7006-30-2)
LX-T5-111 E12 PLUG GAUGE FOR TESTING CONTACT MAKING (7006-25C-1)
LX-T5-112 E12 "NOT GO" PLUG GAUGE (7006-26B-1)
LX-T5-113 E12 "GO" PLUG GAUGE (7006-32A-1)
LX-T5-114 TEST PROBE "a" DIA. 12, EN 50144-2-5, IEC 60745-2-5
LX-T5-115 E14 PLUG GAUGE FOR LAMPHOLDERS WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONTACT MAKING (7006-30A-1)
LX-T5-116 SMALL TEST FINGER - test probe 19
LX-T5-117 TEST ROD DIA. 8 X 230 mm (IEC 60335-2-14 cl. 20.102)
LX-T5-118 TEST PIN DIA. 3 x 100 mm
LX-T5-119 GAUGE FOR THE VERIFICATION OF THE OUTLINE OF COVERS OR COVER-PLATES
LX-T5-12 E27 TEST CAP FOR TORQUE TESTS
LX-T5-120 CYLINDRICAL STEEL ROD, DIA. 3 mm (IEC 60884-1, Cl. 24)
LX-T5-122 "NOT GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-28C-1
LX-T5-123 ALIGNMENT GAUGE FOR FUSE 5 x 20 mm (IEC 60127-2, Fig. 4)
LX-T5-124 ALIGNMENT GAUGE FOR FUSE 6.3 x 32 mm (IEC 60127-2, Fig. 4)
LX-T5-125 MAX. GAUGE FOR FUSES 5 x 20 mm
LX-T5-126 MIN. GAUGE FOR FUSES 5 x 20 mm
LX-T5-127 MAX. GAUGE FOR FUSES 6.3 x 32 mm
LX-T5-128 MIN. GAUGE FOR FUSES 6.3 x 32 mm
LX-T5-129 SOLID LINK FOR TEST ON FUSE CLIPS (BS 1363-1, Fig. 19, Cl. 20)
LX-T5-13 E40 TEST CAP FOR TORQUE TESTS
LX-T5-130 ELECTRICAL INDICATOR
LX-T5-131 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN OF 10/16A 250 V TWO-POLE FIXED SOCKET OUTLETS (IEC 60884-1, CEE 7)
LX-T5-132 GY6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-59D-2)
LX-T5-133 G6.35, GX6.35 & GY6.35 "GO" GAUGE FOR LAMPHOLDERS 15 (7006-61B-4)
LX-T5-134 G6.35 & GX6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-61C-4)
LX-T5-135 GX5.3 & GU5.3 SINGLE PIN GAUGE FOR CHECKING CONTACT MAKING IN LAMPHOLDERS (7006-73G-2)
LX-T5-136 GX5.3 GAUGE FOR CHECKING MAX. WITHDRAWAL FORCE OF CONTACTS IN LAMPHOLDERS (7006-73F-2)
LX-T5-138 ADDITIONAL "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-27J-1
LX-T5-139 "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS (7006-27H-1)
LX-T5-14 E14 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
LX-T5-146 GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-53-1)
LX-T5-147 GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT MAKING (7006-52-1)
LX-T5-148 "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-28D-1)
LX-T5-149 "GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-27-7)
LX-T5-15 E27 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
LX-T5-150 E27 GAUGE "GO" C13A
LX-T5-151 E27 GAUGE "NOT GO" C13E
LX-T5-152 E33 GAUGE "GO" C13B
LX-T5-153 E33 GAUGE "NOT GO" C13F
LX-T5-154 R1? GAUGE "GO" C13C
LX-T5-155 R1? GAUGE "NOT GO" C13G
LX-T5-156 R2 GAUGE "GO" C13D
LX-T5-157 R2 GAUGE "NOT GO" C13H
LX-T5-158 E27 GAUGE "GO" C14A
LX-T5-159 E27 GAUGE "NOT GO" C14E
LX-T5-16 E40 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
LX-T5-160 E33 GAUGE "GO" C14B
LX-T5-161 E33 GAUGE "NOT GO" C14F
LX-T5-162 R1? GAUGE "GO" C14C
LX-T5-163 R1? GAUGE "NOT GO" C14G
LX-T5-164 R2 GAUGE "GO" C14D
LX-T5-165 R2 GAUGE "NOT GO" C14H
LX-T5-166 E10 TEST CAP FOR TORQUE TESTS
LX-T5-167 E26 TEST CAP FOR TORQUE TESTS
LX-T5-168 E27 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-22A-5)
LX-T5-169 E14 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-31-5)
LX-T5-17 PUSH-PULL DYNAMOMETER 20N
LX-T5-170 W3/16 GAUGE "GO" C15A
LX-T5-171 W3/16 GAUGE "NOT GO" C15B
LX-T5-172 W3/16 GAUGE "GO" C15C
LX-T5-173 W3/16 GAUGE "NOT GO" C15D
LX-T5-175 D II. GAUGE C16A
LX-T5-176 D III. GAUGE C16B
LX-T5-177 D IV.H GAUGE C16C
LX-T5-178 D V.H GAUGE C16D
LX-T5-18 PUSH-PULL DYNAMOMETER 50N
LX-T5-180 D II. GAUGE C17A
LX-T5-181 D III. GAUGE C17B
LX-T5-182 D IV.H GAUGE C17C
LX-T5-183 D V.H GAUGE C17D
LX-T5-185 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (DIN 49406, IEC 60884-1)
LX-T5-186 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (SSA 444, IEC 60884-1)
LX-T5-187 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (EN 50075, IEC 60884-1)
LX-T5-19 PUSH-PULL DYNAMOMETER 100N
LX-T5-190 E26 TEST CAP FOR TORQUE TESTS (7004-21A-2)
LX-T5-191 E12 TEST CAP FOR TORQUE TESTS (7004-28-2)
LX-T5-192 E17 TEST CAP FOR TORQUE TESTS (7004-26-2)
LX-T5-193 SKIRTED E26 TEST CAP FOR TORQUE TESTS (7004-130-1)
LX-T5-194 E26d TEST CAP FOR TORQUE TESTS (7004-29-2)
LX-T5-195 E27/51x39 TEST CAP FOR TORQUE TESTS (7004-27-3)
LX-T5-196 B22d TEST CAP FOR TORQUE TESTS (7004-10-7)
LX-T5-197 B15d TEST CAP FOR TORQUE TESTS (7004-11-6)
LX-T5-198 TEST PIN DIA. 1 x 60 mm, WITH 5 N LX-SPRING (BS 1363-2, Cl. 9.4.1)
LX-T5-200 CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
LX-T5-201 NO CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
LX-T5-202 CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
LX-T5-203 NO CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
LX-T5-204 CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
LX-T5-205 NO CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
LX-T5-206 CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
LX-T5-207 NO CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
LX-T5-208 CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
LX-T5-209 NO CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
LX-T5-21 TEST KNIFE SIZE 00
LX-T5-210 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9F)
LX-T5-211 NOT-GO GAUGE FOR CONN. TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9G)
LX-T5-212 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C14, C16 AND C18 (IEC 60320-1, FIG. 9H)
LX-T5-213 GO GAUGE FOR CONN. TO STANDARD SHEET C15 (IEC 60320-1, FIG. 9J)
LX-T5-214 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C15 A (IEC 60320-1, FIG. 9S)
LX-T5-215 NOT GO GAUGE FOR CONN. TO STANDARD SHEET C13, C15 & C17 (IEC 60320-1, FIG. 9R)
LX-T5-216 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C16A (IEC 60320-1, FIG. 9T)
LX-T5-22 TEST KNIFE SIZE 0
LX-T5-220 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING C14 (IEC 60320-1, Cl. 16)
LX-T5-221 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 (IEC 60320-1, Cl. 16)
LX-T5-222 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 A (IEC 60320-1, Cl. 16)
LX-T5-225 APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C14
LX-T5-226 APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C16
LX-T5-23 TEST KNIFE SIZE 1
LX-T5-235 CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
LX-T5-236 NO CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
LX-T5-237 CONTACT GAUGE FOR EARTHING CONTACT 16 A
LX-T5-238 NO CONTACT GAUGE FOR EARTHING CONTACT 16 A
LX-T5-24 TEST KNIFE SIZE 2
LX-T5-25 TEST KNIFE SIZE 3
LX-T5-250 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C14
LX-T5-251 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16
LX-T5-252 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16 A
LX-T5-253 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS C22
LX-T5-259 APPLIANCE INLET GAUGE FOR PULLING TEST - C24
LX-T5-26 TEST KNIFE SIZE 4
LX-T5-260 APPLIANCE INLET GAUGE FOR PULLING TEST C14
LX-T5-261 APPLIANCE INLET GAUGE FOR PULLING TEST - C16
LX-T5-262 APPLIANCE INLET GAUGE FOR PULLING TEST - C16 A
LX-T5-263 APPLIANCE INLET GAUGE FOR PULLING TEST - C2
LX-T5-264 APPLIANCE INLET GAUGE FOR PULLING TEST - C6
LX-T5-265 APPLIANCE INLET GAUGE FOR PULLING TEST - C8
LX-T5-266 APPLIANCE INLET GAUGE FOR PULLING TEST - C10
LX-T5-267 APPLIANCE INLET GAUGE FOR PULLING TEST - C18
LX-T5-268 APPLIANCE INLET GAUGE FOR PULLING TEST - C20
LX-T5-269 APPLIANCE INLET GAUGE FOR PULLING TEST - C22
LX-T5-27 TEST KNIFE SIZE 4a
LX-T5-270 E14 TEST CAP A (IEC 60238, Fig. 13)
LX-T5-273 E14 TEST CAP B (IEC 60238, Fig. 13)
LX-T5-274 E27 TEST CAP B (IEC 60238, Fig. 14)
LX-T5-275 TEST CAP FOR LAMPHOLDERS E40 (IEC 60238 Fig. 15)
LX-T5-276 E27 GAUGE I. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22C-1)
LX-T5-277 E27 GAUGE II. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22D-1)
LX-T5-28 FOOT PROBE (EN 836, Fig. 3)
LX-T5-280 E14 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
LX-T5-281 E27 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
LX-T5-282 E40 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
LX-T5-283 E10 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
LX-T5-284 GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 & E26d (NON-SKIRTED) (7006-29-3)
LX-T5-285 E26d GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-29A-2)
LX-T5-286 E26d GAUGE WITH REFERENCE DIAMETER OF 23 mm FOR CAPS (7006-29B-2)
LX-T5-287 E26d GAUGE WITH REFERENCE DIAMETER OF 13,2 mm FOR CAPS (7006-29C-2)
LX-T5-288 E26d GAUGE WITH REFERENCE DIAMETER OF 10,4 mm FOR CAPS ON FINISHED LAMPS (7006-29D-1)
LX-T5-289 G5 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
LX-T5-290 G5 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
LX-T5-291 G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
LX-T5-292 E26 "GO" GAUGE FOR LAMPHOLDERS (7006-25B-2)
LX-T5-293 E26 & E26d "NOT GO" GAUGE FOR LAMPHOLDERS (7006-26A-2)
LX-T5-294 E26d GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER(7006-29E-1)
LX-T5-295 E26d GAUGE A FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
LX-T5-296 E26d GAUGE B FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
LX-T5-297 E26d GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-29G-3)
LX-T5-298 E26d GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS (7006-29H-3)
LX-T5-299 E26d PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN LAMPHOLDERS (7006-29J-1)
LX-T5-300 E26d "GO" PLUG GAUGE FOR LAMPHOLDERS (7006-29K-1)
LX-T5-301 GAUGE 947 A1
LX-T5-302 GAUGE 947 A2
LX-T5-303 GAUGE 947 A3
LX-T5-304 GAUGE 947 A4
LX-T5-305 GAUGE 947 A5
LX-T5-306 GAUGE 947 B6
LX-T5-307 GAUGE 947 B7
LX-T5-308 GAUGE 947 B8
LX-T5-309 GAUGE 947 B9
LX-T5-31 DUMMY FUSE LINK SET (4 pcs.) SIZE 00
LX-T5-310 GAUGE 947 B10
LX-T5-311 GAUGE 947 B11
LX-T5-312 GAUGE 947 B12
LX-T5-313 GAUGE 947 B13
LX-T5-314 GAUGE 947 B14
LX-T5-315 GAUGE 947 B15
LX-T5-316 GAUGE 947 B16
LX-T5-317 SET OF GAUGES 947
LX-T5-32 DUMMY FUSE LINK SET (4 pcs.) SIZE 0
LX-T5-320 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
LX-T5-321 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
LX-T5-322 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
LX-T5-323 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
LX-T5-324 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
LX-T5-328 GLASS VESSEL FOR MICROWAVE OVEN
LX-T5-32X VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES
LX-T5-33 DUMMY FUSE LINK SET (4 pcs.) SIZE 1
LX-T5-330 LOADING WEIGHT 0.5 KG FOR REFRIGERATORS
LX-T5-331 LOADING WEIGHT 2.3 KG FOR REFRIGERATORS
LX-T5-335 ECCENTRIC WEIGHT FOR OVENS (IEC 60335-2-6, Fig. 103)
LX-T5-336 TEST ROD dia. 6, l 150
LX-T5-337 SHORT TEST PROBE DIA. 12
LX-T5-338 TEST ROD DIA. 40 WITH HEMILX-SPHERICAL END
LX-T5-339 TEST HEMILX-SPHE DIA. 100
LX-T5-34 DUMMY FUSE LINK SET (4 pcs.) SIZE 2
LX-T5-340 G5 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-47A-2)
LX-T5-341 G23 PLUG GAUGE "A" FOR CHECKING MAXIMUM INSERTION FORCE AND MAXIMUM WITHDRAW FORCE IN LAMPHOLDERS (7006-69A-1)
LX-T5-342 G23 and GX23 PLUG GAUGE "B" FOR CHECKING MAXIMUM INSERTION FORCE IN LAMPHOLDER (7006-69B-2)
LX-T5-343 G23 PLUG GAUGE "C" FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS
LX-T5-344 G13 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
LX-T5-345 G13 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
LX-T5-346 G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
LX-T5-347 G5 TEST CAP (IEC 60400, Fig. 4)
LX-T5-348 G13 TEST CAP (IEC 60400, Fig. 4)
LX-T5-35 DUMMY FUSE LINK SET (4 pcs.) SIZE 3
LX-T5-350 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 2)
LX-T5-351 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C5 (IEC 60320-1, FIG. 4)
LX-T5-352 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5)
LX-T5-353 GO GAUGE FOR SIDE-ENTRY CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5 bis)
LX-T5-354 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 6)
LX-T5-355 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1, C5 AND C7 (IEC 60320-1, FIG. 7)
LX-T5-356 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1 AND C7 (IEC 60320-1, FIG. 8)
LX-T5-357 NOT-GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C8, C8A AND C8B (IEC 60320-1, F. 9)
LX-T5-358 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9A)
LX-T5-359 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9B)
LX-T5-36 DUMMY FUSE LINK SET (4 pcs.) SIZE 4
LX-T5-360 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C10 (IEC 60320-1, FIG. 9C)
LX-T5-361 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C17 (IEC 60320-1, FIG. 9K)
LX-T5-362 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C19 (IEC 60320-1, FIG. 9L)
LX-T5-363 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C20 AND C24 (IEC 60320-1, FIG. 9M)
LX-T5-364 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C21 (IEC 60320-1, FIG. 9N)
LX-T5-365 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C22 (IEC 60320-1, FIG. 9P)
LX-T5-366 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C23 (IEC 60320-1, FIG. 9Q)
LX-T5-37 DUMMY FUSE LINK SET (4 pcs.) SIZE 4a
LX-T5-370 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-371 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-372 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-373 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-374 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-375 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 210 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-376 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 270 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
LX-T5-37X VESSELS FOR TESTING INDUCTION HOTPLATES
LX-T5-380 "GO" AND "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 6)
LX-T5-381 "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 7)
LX-T5-382 "GO" GAUGE FOR STARTERS (IEC 155 fig. 8)
LX-T5-383 "GO" GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (IEC 155 fig. B.2)
LX-T5-400 "GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-27B-1)
LX-T5-401 "GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-27F-1)
LX-T5-402 "NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-28A-1)
LX-T5-403 "NOT GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-28B-1)
LX-T5-404 "GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS (7006-27C-1)
LX-T5-405 "GO" GAUGE FOR DIMENSION "S1" OF E14 CAPS ON FINISHED LAMPS (7006-27G-1)
LX-T5-406 GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT MAKING (7006-50-1)
LX-T5-407 GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT MAKING (7006-54-2)
LX-T5-41 RIGID TEST FINGER (IEC 61032, F. 7, TEST PROBE 11)
LX-T5-411 GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51A-2)
LX-T5-412 GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-55-2)
LX-T5-413 GAUGE FOR E27/51x39 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51-2)
LX-T5-414 GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT DURING INSERTION (7006-51A-2)
LX-T5-415 "NOT GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-10-8)
LX-T5-416 "NOT GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-10-8)
LX-T5-417 "GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-11-8)
LX-T5-418 "GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-11-8)
LX-T5-419 GAUGE B15d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
LX-T5-42 RIGID TEST FINGER WITH FORCE METER 50 N
LX-T5-420 GAUGE B22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
LX-T5-421 GAUGE FOR TESTING THE RETENTION OF B15d CAPS IN THE HOLDER (7006-4B-1)
LX-T5-422 GAUGE FOR TESTING THE RETENTION OF B22d CAPS IN THE HOLDER (7006-4B-1)
LX-T5-43 RIGID TEST FINGER WITH FORCE METER 100 N
LX-T5-430 E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3)
LX-T5-431 E26 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
LX-T5-432 B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
LX-T5-433 E14 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
LX-T5-438 "GO" GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d (7006-27D-3)
LX-T5-440 B22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
LX-T5-441 BY22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
LX-T5-442 B15d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15B-1)
LX-T5-443 B15d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
LX-T5-444 B22d, B22d-3 & BY22d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
LX-T5-445 B15d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12C-2)
LX-T5-446 B15 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12D-2)
LX-T5-447 B22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
LX-T5-448 BY22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
LX-T5-449 B22 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12B-2)
LX-T5-451 28x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
LX-T5-452 40x2,5 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
LX-T5-453 35x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
LX-T5-454 45x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
LX-T5-455 20,8x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
LX-T5-457 PLUG GAUGE FOR LAMPHOLDERS BY22d (Sh. 7006-17B-1)
LX-T5-458 GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22d-3 (90/135deg) (Sh. 7006-15-7)
LX-T5-459 20,8x2 "GO" GAUGE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-46 TEST PIN DIA. 1 x 20 mm (Fig. 1, BS 1363-2)
LX-T5-460 28x2 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-461 40x2,5 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-462 35x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-463 45x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-464 28x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-465 40x2,5 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-466 35x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-467 45x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-468 GX24 GAUGE "A" FOR LAMPHOLDER (7006-78A-5)
LX-T5-469 GX24 GAUGE "C" FOR LAMPHOLDER (7006-78C-5)
LX-T5-47 TEST PIN DIA.3-DIA.4, l=15 (IEC 61032, F. 9, TEST PROBE 13)
LX-T5-470 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GX10q AND GY10q (IEC 60400 F. 27)
LX-T5-471 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX10q (IEC 60400 F. 33)
LX-T5-472 PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDER GY10q (Sh. 7006-85C-1)
LX-T5-473 "GO" GAUGE FOR LAMPHOLDER GY10q (Sh. 7006-85B-2)
LX-T5-474 "GO" GAUGE FOR LAMPHOLDER GX10q (Sh. 7006-84C-2)
LX-T5-475 PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDERS GX10q TYPE A AND MINIMUM RETENTION FORCE IN LAMPHOLDERS TYPE B (Sh. 7006-84D-1)
LX-T5-476 PLUG GAUGE LAMPHOLDER BA21 (Sh. 7006-12-8)
LX-T5-477 PLUG GAUGE LAMPHOLDER B15 (Sh. 7006-12-8)
LX-T5-478 PLUG GAUGE LAMPHOLDER B22 (Sh. 7006-12-8)
LX-T5-479 "GO" AND "NOT GO" PLUG GAUGE FOR BAYONET LAMPHOLDER B22d-3 (Sh. 7006-20-4)
LX-T5-48 TEST PIN DIA. 4 x 100 mm
LX-T5-480 20,8x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
LX-T5-481 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 1)
LX-T5-482 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 2)
LX-T5-483 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 3)
LX-T5-484 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 4)
LX-T5-485 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 5)
LX-T5-486 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 6)
LX-T5-487 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 7)
LX-T5-488 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 1)
LX-T5-489 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 2)
LX-T5-49 LONG TEST PIN DIA.3-DIA.4, l=50
LX-T5-490 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 3)
LX-T5-491 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 4)
LX-T5-492 GO AND NOT GO GAUGE FOR CAPS G24q-5 & GX24q-5 (Sh. 7006-78-5, Fig. 1)
LX-T5-493 G5.3 "GO" GAUGE FOR LAMHOLDERS (7006-73A-1)
LX-T5-494 GX5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73D-3)
LX-T5-495 GY5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73E-3)
LX-T5-496 GY5.3 SINGLE PIN GAUGE FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-73J-1)
LX-T5-497 GZ10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-120-1)
LX-T5-498 G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4) (Change E=2.44 D=4.4 mm)
LX-T5-499 G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4) (Change E=2.44 D = 12.35 mm)
LX-T5-50 TEST PROBE DIA. 30 x 80 mm (IEC 61032, F. 9, TEST PROBE 41)
LX-T5-51 RIGID STEEL WIRE DIA. 1 WITH HANDLE & STOP LX-SPHERE (IEC 61032 - Test probe D)
LX-T5-52 RIGID STEEL ROD DIA. 2,5 WITH HANDLE & STOP LX-SPHERE (IEC 61032 - Test probe C)
LX-T5-534 GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1)
LX-T5-541 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=118mm (7006-62-4)
LX-T5-542 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=189mm (7006-62-4)
LX-T5-543 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=254mm (7006-62-4)
LX-T5-544 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=333mm (7006-62-4)
LX-T5-545 SINGLE PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS G5, 2G(X)7, 2G10, 2G11, G13, G(X)23, G(X)(Y)24, G(X)(Y)32 (7006-69E-5)
LX-T5-546 G5 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-46-3)
LX-T5-547 G13 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-44-4)
LX-T5-548 G6.35, GX6.35 & GZ6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
LX-T5-549 GY6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
LX-T5-55 TEST PIN DIA. 2 x 100 mm
LX-T5-550 G4 GAUGE A - "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN LAMP BASES (7006-72-1)
LX-T5-551 G4 GAUGE B - "GO" GAUGE FOR BASE OF BI-PIN LAMP BASES (7006-72-1)
LX-T5-552 G5.3 GAUGE FOR BI-PIN CAP ON FINISHED LAMPS (7006-73-1)
LX-T5-553 G5.3 "GO" GAUGE FOR BASE (7006-126-1)
LX-T5-554 GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1) isti kot LX-T5-534
LX-T5-555 GR8&GR10q GO GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS (7006-68E-1)
LX-T5-556 GR8&GR10q GO AND NOT GO GAUGE FOR CHECKING THE PINS OF CAPS (7006-68F-1)
LX-T5-557 GR10q GO GAUGE FOR UNMOUNTED CAPS (7006-77-2)
LX-T5-558 GR10q GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN LX-SPACING AND LENGTH (7006-77A-2)
LX-T5-559 GX10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84-2)
LX-T5-56 TEST HOOK (IEC 60065, Figure 4)
LX-T5-560 GX10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-84A-1)
LX-T5-561 GX10q NOT GO GAUGE "B" FOR CAPS ON FINISHED LAMPS (7006-84B-1)
LX-T5-562 GY10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85-2)
LX-T5-563 GY10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-85A-1)
LX-T5-564 G13 HEATED TEST CAP A FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
LX-T5-565 G13 HEATED TEST CAP B FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
LX-T5-566 G5 HEATED TEST CAP FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9a)
LX-T5-568 SET OF GAUGES A1-A16 (IEC 60947-1, Fig. 2)
LX-T5-569 SET OF GAUGES B1-B16 (IEC 60947-1, Fig. 2)
LX-T5-571 GAUGE FOR TESTING MAX. WITHDRAWAL FORCE OF PLUG 2P AC 250V 2,5A (DIN VDE 0620-1 Fig.16d)
LX-T5-572 GAUGE L1 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L1)
LX-T5-573 GAUGE L2 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L2)
LX-T5-574 RING GAUGE DIN 49 441 - L1
LX-T5-575 RING GAUGE DIN 49 441 - L2
LX-T5-577 GAUGE 14 (DIN VDE 0620-1)
LX-T5-578 GAUGE 16A (DIN VDE 0620-1)
LX-T5-579 E14 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
LX-T5-58 TEST PIN DIA. 1 x 100 mm
LX-T5-580 E27 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
LX-T5-581 B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
LX-T5-582 B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
LX-T5-583 GX10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-584 GX10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-585 GX10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-586 GX10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-587 GX10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-588 GX10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
LX-T5-589 GY10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-59 TEST PROBE DIA. 12 (IEC 60950, Fig. 2C)
LX-T5-590 GY10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-591 GY10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-592 GY10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-593 GY10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-594 GY10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
LX-T5-595 GAUGE FOR CHECKING SIDE CONTACTS (F. 43 - DIN VDE 0620-1)
LX-T5-596 "GO" GAUGE A FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
LX-T5-597 "GO" GAUGE B FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
LX-T5-598 CONTACT MAKING GAUGE FOR LAMPHOLDERS G10q, GX10q, GY10q (7006-79B-1)
LX-T5-60 STRAIGHT PROBE DIA. 38 (UL 153, Fig. 1)
LX-T5-600 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C2 (IEC 60320-1, Cl. 16)
LX-T5-601 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C6 (IEC 60320-1, Cl. 16)
LX-T5-602 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C8 (IEC 60320-1, Cl. 16)
LX-T5-603 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C10 (IEC 60320-1, Cl. 16)
LX-T5-604 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C18 (IEC 60320-1, Cl. 16)
LX-T5-605 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C20 (IEC 60320-1, Cl. 16)
LX-T5-606 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C22 (IEC 60320-1, Cl. 16)
LX-T5-607 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C24 (IEC 60320-1, Cl. 16)
LX-T5-61 TEST LX-SPHERE DIA. 50, 0,51 kg
LX-T5-611 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C1, C5 and C7 (IEC 60320-1, Cl. 16)
LX-T5-612 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C5 (LONG) (IEC 60320-1, Cl. 16)
LX-T5-613 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C9, C13, C15, C15A, AND C17 (IEC 60320-1, Cl. 16)
LX-T5-614 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C13, C15 AND C15A (LONG) (IEC 60320-1, Cl. 16)
LX-T5-615 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, C21 AND C23 (IEC 60320-1, Cl. 16)
LX-T5-616 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, AND C21 (LONG) (IEC 60320-1, Cl. 16)
LX-T5-62 RIGID LX-SPHERE DIA. 12.5
LX-T5-620 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET F (IEC 320-2-2, FIG. 101)
LX-T5-621 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET H (IEC 320-2-2, FIG. 102)
LX-T5-622 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET J (IEC 320-2-2, FIG. 103)
LX-T5-623 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET L (IEC 320-2-2, FIG. 104)
LX-T5-63 TEST LX-SPHERE 0,5 kg (IEC 60950-1)
LX-T5-630 GO GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (Fig. B2, IEC 155)
LX-T5-631 GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G5 (Sh. 7006-46A-3)
LX-T5-632 GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13 (Sh. 7006-45-4)
LX-T5-633 GO AND NOT GO GAUGE FOR CAPS ON FINISHED LAMPS 2G7 & 2GX7 (Sh. 7006-102-1)
LX-T5-638 GO GAUGE FOR CAPS ON FINISHED LAMPS 2G11 (Sh. 7006-82-1)
LX-T5-639 GO GAUGE FOR CAPS ON FINISHED LAMPS G10q, GX10q, GY10q, GZ10q (Sh. 7006-79-2)
LX-T5-64 TEST LX-SPHERE DIA. 40 (IEC 60950-1, 60065)
LX-T5-640 GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40-1)
LX-T5-641 NOT GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40A-1)
LX-T5-642 GO AND NOT GO GAUGE FOR SINGLE-PIN CAP ON FINISHED LAMPS Fa6 (Sh. 7006-41-2)
LX-T5-643 GO GAUGE FOR CAPS 2G13-41 (Sh. 7006-33-2)
LX-T5-644 GO GAUGE FOR CAPS 2G13-56 (Sh. 7006-33-2)
LX-T5-645 GO GAUGE FOR CAPS 2G13-92 (Sh. 7006-33-2)
LX-T5-646 GO GAUGE FOR CAPS 2G13-152 (Sh. 7006-33-2)
LX-T5-647 GO AND NOT GO GAUGE FOR RECESSED DOUBLE COONTACT CAP R17d ON FINISHED LAMPS (Sh. 7006-57-3)
LX-T5-650 GAUGE FOR THE VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (F. 101, IEC 60884-2-4)
LX-T5-651 GAUGE FOR THE VERIFICATION OF MINIMUM WITHDRAWAL FORCE (F. 102, IEC 60884-2-4)
LX-T5-652 GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5,8 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
LX-T5-653 GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 6 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
LX-T5-654 GAUGE C2A FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
LX-T5-655 GAUGE C2B FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
LX-T5-656 GAUGE C3 FOR ACCEPTANCE OF TWO-POLE PLUGS (F. 3 CEE 7, VDE0620-1 Gauge 3)
LX-T5-657 GAUGE C4 FOR ACCEPTANCE OF TWO-POLE PLUGS WITH SIDE EARTHING-CONTACTS (F. 4 CEE 7, VDE0620-1 Gauge 4)
LX-T5-658 GAUGE C6A FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
LX-T5-659 GAUGE C6B FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
LX-T5-66 RIGID TEST LX-SPHERE WITH GUARD DIA. 50
LX-T5-660 GAUGE C7A FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
LX-T5-661 GAUGE C7B FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
LX-T5-662 GAUGE C7C FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
LX-T5-663 GAUGE C7D FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
LX-T5-664 GAUGE C8 FOR WIRING CHANNEL (F. 8 CEE 7)
LX-T5-665 "GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
LX-T5-666 "NOT GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
LX-T5-667 "GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
LX-T5-668 "NOT GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
LX-T5-669 GAUGE C10A FOR PIN LX-SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
LX-T5-67 DYNAMOMETER 20 N
LX-T5-670 GAUGE C10B FOR PIN LX-SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
LX-T5-671 GAUGE C11 FOR MAXIMUM OPENING OF CONTACT TUBES (F. 11 CEE 7, VDE0620-1 Gauge 8)
LX-T5-672 GAUGE C12 FOR INTERCHANGEABILITY (F. 12 CEE 7, VDE0620-1 Gauge 9)
LX-T5-673 GAUGE FOR INTERCHANGEABILITY (F. 13 CEE 7; EN 50075, Fig. 2)
LX-T5-674 GAUGE FOR DIMENSIONS OF MOUNTING BOXES (F. 14 CEE 7)
LX-T5-675 GAUGE FOR NON-INTERCHANGEABILITY WITH TWO-POLE PLUGS WITH EARTHING CONTACTS (F. 15 CEE 7)
LX-T5-676 GAUGE FOR NON-ACCEPTANCE OF TWO-POLE PLUGS WITHOUT EARTHING CONTACT (F. 16 CEE 7, VDE0620-1 Gauge 11)
LX-T5-677 GAUGE FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (F. 18 CEE 7, VDE0620-1 Gauge 10)
LX-T5-678 GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250&nbLX-SP;G (F. 19 CEE 7 )
LX-T5-679 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250&nbLX-SP;G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
LX-T5-68 DYNAMOMETER 50N
LX-T5-680 GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000&nbLX-SP;G (F. 19 CEE 7 )
LX-T5-681 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000&nbLX-SP;G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
LX-T5-684 CONTACT TEST GAUGE (F. 12, BS 1363-2)
LX-T5-686 TURNING MOMENT GAUGE (F. 15, BS 1363-2)
LX-T5-687 WITHDRAWAL PULL GAUGE A FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
LX-T5-688 WITHDRAWAL PULL GAUGE B FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
LX-T5-689 TEST PLUG FOR TEMPERATURE RISE (F. 30, BS 1363-2)
LX-T5-69 DYNAMOMETER 100 N
LX-T5-690 TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-15, ANSI WD 6)
LX-T5-691 TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-15, ANSI WD 6)
LX-T5-692 TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-20, ANSI WD 6)
LX-T5-693 TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-20, ANSI WD 6)
LX-T5-694 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-15, ANSI WD 6)
LX-T5-695 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-15, ANSI WD 6)
LX-T5-696 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-20, ANSI WD 6)
LX-T5-697 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-20, ANSI WD 6)
LX-T5-698 TEST PLUG R1 FOR BREAKING CAPACITY TEST (DIN 49 441)
LX-T5-699 TEST PLUG FOR BREAKING CAPACITY TEST (F. 4, BS 1363-1)
LX-T5-70 PROBE FOR CONDUIT ENTRIES DIA. 16 mm
LX-T5-700 TEST CAP B22d (IEC 61184, Fig. 6 )
LX-T5-701 TEST CAP B22d FOR INSULATION RESISTANCE NAD HIGH-VOLTAGE TESTS (IEC 61184, Fig. 11)
LX-T5-702 GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWES (IEC 61184, Fig. 3)
LX-T5-703 TEST HOLDER FOR TORSION TEST FOR G5 CAPPED LAMPS (IEC 61195, Fig. A.1)
LX-T5-704 TEST HOLDER FOR TORSION TEST FOR G13 CAPPED LAMPS (IEC 61195, Fig. A.1)
LX-T5-705 G5 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
LX-T5-706 G5 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
LX-T5-707 G13 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
LX-T5-708 G13 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
LX-T5-71 PROBE FOR CONDUIT ENTRIES DIA. 20 mm
LX-T5-710 "GO" GAUGE FOR LAMPHOLDERS G4 (Sh. 7006-72A-3)
LX-T5-711 GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS G4 (Sh. 7006-72B-2)
LX-T5-712 GO GAUGE FOR G9 LAMPHOLDERS (Sh. 7006-129B-1)
LX-T5-713 GO GAUGE FOR CHECKING MAXIMUM INSERTION AND WITHDRAWAL TORQUE IN LAMPHOLDERS GU10 (Sh. 7006-121A-2)
LX-T5-717 GAUGE "A" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80A-2)
LX-T5-718 GAUGE "B" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80B-2)
LX-T5-719 GAUGE "C" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80C-2)
LX-T5-72 GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS, AND FO LIVE PARTS OF SOCKET-OUTLETS WITH INCREASED PROTECTION; DIA. 1 x 80 mm (IEC 60884-1, F. 10)
LX-T5-720 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 50 mm (IEC 60335-2-6)
LX-T5-721 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 60 mm (IEC 60335-2-6)
LX-T5-722 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 70 mm (IEC 60335-2-6)
LX-T5-723 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 80 mm (IEC 60335-2-6)
LX-T5-724 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 90 mm (IEC 60335-2-6)
LX-T5-725 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 100 mm (IEC 60335-2-6)
LX-T5-726 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 110 mm (IEC 60335-2-6)
LX-T5-727 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 120 mm (IEC 60335-2-6)
LX-T5-728 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 130 mm (IEC 60335-2-6)
LX-T5-729 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 140 mm (IEC 60335-2-6)
LX-T5-73 GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS; 1 x 3 x 80 mm (IEC 60884-1, F. 9)
LX-T5-730 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 150 mm (IEC 60335-2-6)
LX-T5-731 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 160 mm (IEC 60335-2-6)
LX-T5-732 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 170 mm (IEC 60335-2-6)
LX-T5-733 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 180 mm (IEC 60335-2-6)
LX-T5-734 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 190 mm (IEC 60335-2-6)
LX-T5-735 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 200 mm (IEC 60335-2-6)
LX-T5-736 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 210 mm (IEC 60335-2-6)
LX-T5-737 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 220 mm (IEC 60335-2-6)
LX-T5-738 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 230 mm (IEC 60335-2-6)
LX-T5-739 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 240 mm (IEC 60335-2-6)
LX-T5-740 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 250 mm (IEC 60335-2-6)
LX-T5-741 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 260 mm (IEC 60335-2-6)
LX-T5-742 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 270 mm (IEC 60335-2-6)
LX-T5-743 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 280 mm (IEC 60335-2-6)
LX-T5-744 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 290 mm (IEC 60335-2-6)
LX-T5-745 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 300 mm (IEC 60335-2-6)
LX-T5-746 IRON BAR 100 x 20 x 2 mm (IEC 60335-2-6)
LX-T5-747 "GO" GAUGE FOR CHECKING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
LX-T5-748 "GO" GAUGE FOR CHECKING MAXIMUM WITHDRAWAL TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
LX-T5-749 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (VDE0620-1 Gauge&nbLX-SP;10)
LX-T5-75 JOINTED TEST FINGER (IEC 61032, F. 2, TEST PROBE B)
LX-T5-750 GO PLUG GAUGE A FOR STARTHOLDERS (IEC 60400, F. 11)
LX-T5-751 GO PLUG GAUGE B FOR STARTHOLDERS (IEC 60400, F. 11)
LX-T5-752 PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING & RETENTION (IEC 60400, F. 12)
LX-T5-753 LX-SPECIAL PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING (IEC 60400, F. 13)
LX-T5-754 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G5 (IEC 60400, F. 14)
LX-T5-755 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G13 (IEC 60400, F. 15)
LX-T5-756 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-41 (IEC 60400, F. 16)
LX-T5-757 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-56 (IEC 60400, F. 16)
LX-T5-758 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-92 (IEC 60400, F. 16)
LX-T5-759 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-152 (IEC 60400, F. 16)
LX-T5-76 TEST NAIL (IEC 60335-1, F. 7)
LX-T5-760 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G20 (IEC 60400, F. 17)
LX-T5-761 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa6 (IEC 60400, F. 18)
LX-T5-762 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G10q (IEC 60400, F. 19)
LX-T5-763 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa8 (IEC 60400, F. 20)
LX-T5-765 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS R17d (IEC 60400, F. 22)
LX-T5-766 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 23)
LX-T5-767 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G23 AND GX23 (IEC 60400, F. 24)
LX-T5-768 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GR10q (IEC 60400, F. 26)
LX-T5-769 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 28)
LX-T5-77 SMALL TEST FINGER - TEST PROBE 18
LX-T5-770 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G32 AND GY32 (IEC 60400, F. 29)
LX-T5-771 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G23 (IEC 60400, F. 30)
LX-T5-772 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR8 (IEC 60400, F. 31)
LX-T5-773 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR10q (IEC 60400, F. 32)
LX-T5-774 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GY10q (IEC 60400, F. 34)
LX-T5-775 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 35)
LX-T5-776 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX23 (IEC 60400, F. 36)
LX-T5-777 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 37)
LX-T5-778 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G32, GX32 AND GY32 (IEC 60400, F. 38)
LX-T5-779 TEST CAP FOR THE TEST OF CLAUSE 13 (IEC 60400, F. 21)
LX-T5-78 GAUGE FOR VERIFICATION OF GROOVES, HOLES AND REVERSE TAPERS DIA. 2.5, l 100
LX-T5-780 GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 10 A AND 15 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
LX-T5-781 GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 20 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
LX-T5-782 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (AS3112, FIG. 3.6)
LX-T5-783 10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
LX-T5-784 15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
LX-T5-785 20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
LX-T5-786 10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
LX-T5-787 15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
LX-T5-788 20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
LX-T5-789 GX10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-79 LONG TEST PIN DIA. 4, l=50 (TEST PROBE 12)
LX-T5-790 GX10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-791 GX10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-792 GX10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-793 GX10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-794 GX10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
LX-T5-795 GY10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-796 GY10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-797 GY10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-798 GY10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-799 GY10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-80 TEST PLUG FOR ANTENNA COAXIAL SOCKETS
LX-T5-800 GY10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
LX-T5-801 GO GAUGES (MIN. AND MAX) FOR SOCKET OUTLET (F. 11, BS 1363-1, 1363-2)
LX-T5-802 CONTACT TEST GAUGE (F. 12, BS 1363-2)
LX-T5-803 GAUGE FOR PLUG PINS (F. 5, BS 1363-1)
LX-T5-804 NON-CONTACT TEST GAUGE (F. 14, BS 1363-2)
LX-T5-805 GAUGE 2A FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
LX-T5-806 GAUGE 2B FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
LX-T5-807 GAUGE 2C FOR MINIMUM OPENING OF CONTACT TUBES, 300 g (VDE0620-1 Gauge 2)
LX-T5-808 GAUGE 1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5 mm (VDE0620-1 Gauge 1)
LX-T5-809 GAUGE 16b FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 16A PLUG (VDE 0620-1 Fig.16b)
LX-T5-81 E14 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
LX-T5-810 GAUGE 16c FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 25A PLUG (VDE 0620-1 Fig.16c)
LX-T5-811 GO GAUGE FOR G9 BASE (Sh. 7006-129-1)
LX-T5-812 NOT GO GAUGE FOR G9 BASE (Sh. 7006-129A-1)
LX-T5-813 B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
LX-T5-814 E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
LX-T5-815 E12 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
LX-T5-816 E17 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
LX-T5-817 CALIBRE C1 POUR 16A (NF C 61-314)
LX-T5-818 CALIBRE C1 POUR 6A (NF C 61-314)
LX-T5-819 CALIBRE C2 POUR 6A (NF C 61-314)
LX-T5-82 E27 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
LX-T5-820 CALIBRE C2 POUR 16A (NF C 61-314)
LX-T5-821 CALIBRE C3A POUR 6A (NF C 61-314)
LX-T5-822 CALIBRE C3B POUR 6A (NF C 61-314)
LX-T5-823 CALIBRE C3C POUR 6A (NF C 61-314)
LX-T5-824 CALIBRE C3D POUR 16A (NF C 61-314)
LX-T5-825 CALIBRE C3E POUR 16A (NF C 61-314)
LX-T5-826 CALIBRE C3F POUR 16A (NF C 61-314)
LX-T5-827 CALIBRE C4A POUR 6A, MASSE 300 g (NF C 61-314)
LX-T5-828 CALIBRE C4A POUR 6A, MASSE 150 g (NF C 61-314)
LX-T5-829 CALIBRE C4B POUR 16A, MASSE 400 g (NF C 61-314)
LX-T5-83 E40 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
LX-T5-830 CALIBRE C4B POUR 16A, MASSE 200 g (NF C 61-314)
LX-T5-831 CALIBRE C4C POUR 16A, MASSE 400 g (NF C 61-314)
LX-T5-832 CALIBRE C4C POUR 16A, MASSE 200 g (NF C 61-314)
LX-T5-833 CALIBRE C5 POUR 6A (NF C 61-314)
LX-T5-834 CALIBRE C5 POUR 16A (NF C 61-314)
LX-T5-835 CALIBRE C6 POUR 16A (NF C 61-314)
LX-T5-836 CALIBRE C7A POUR 6A (NF C 61-314)
LX-T5-837 CALIBRE C7A POUR 16A (NF C 61-314)
LX-T5-838 CALIBRE C7B POUR 6A (NF C 61-314)
LX-T5-839 CALIBRE C7B POUR 16A (NF C 61-314)
LX-T5-84 E14 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-840 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 1)
LX-T5-841 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 2)
LX-T5-842 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 3)
LX-T5-843 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 4)
LX-T5-844 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 5)
LX-T5-845 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 6)
LX-T5-846 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 7)
LX-T5-847 "NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4)
LX-T5-848 "GO" AND "NOT GO" GAUGE FOR G23 BI-PIN CAPS ON FINISHED LAMPS (Sh. 7006-69-2)
LX-T5-849 "GO" GAUGE FOR BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76-1)
LX-T5-85 E27 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-850 "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76A-1)
LX-T5-851 "GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-25H-1)
LX-T5-852 "NOT GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-26C-1)
LX-T5-853 GAUGE FOR TESTING CONTACT MAKING IN E17 LAMPHOLDERS (Sh. 7006-26E-1)
LX-T5-854 GAUGE FOR TESTING CONTACT MAKING IN E26 LAMPHOLDERS (Sh. 7006-25J-1)
LX-T5-855 GAUGE FOR TESTING UNACCEPTABLE CONTACT MAKING IN E26d LAMPHOLDERS (Sh. 7006-29M-1)
LX-T5-856 GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN G9 LAMPHOLDERS (Sh. 7006-129C-1)
LX-T5-857 GAUGE FOR CHECKING CONTACT-MAKING IN G9 LAMPHOLDERS (Sh. 7006-129D-1)
LX-T5-858 GAUGE FOR CHECKING THE MINIMUM WITHDRAWAL TORQUE IN GU10 & GZ10 LAMPHOLDERS (Sh. 7006-120B-1)
LX-T5-859 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-41 (Sh. 7006-33A-2)
LX-T5-86 E40 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-860 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-56 (Sh. 7006-33A-2)
LX-T5-861 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-92 (Sh. 7006-33A-2)
LX-T5-862 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-152 (Sh. 7006-33A-2)
LX-T5-863 GAUGE FOR LAMPHOLDERS 2G13 FOR TESTING CONTACT-MAKING (Sh. 7006-33B-1)
LX-T5-864 "GO" GAUGE FOR LAMPHOLDERS 2GX13 (Sh. 7006-125-1)
LX-T5-865 GAUGE FOR TESTING CONTACT-MAKING IN 2GX13 LAMPHOLDERS (Sh. 7006-125C-1)
LX-T5-866 GAUGE FOR CHECKING THE MINIMUM RETENTION FORCE OF 2GX13 LAMPHOLDERS (Sh. 7006-125D-1)
LX-T5-867 GAUGE "A" FOR LAMPHOLDERS S14d (Sh. 7006-112D-1)
LX-T5-868 GAUGE "B1" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
LX-T5-869 GAUGE "B2" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
LX-T5-87 E14 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
LX-T5-870 GAUGE "A" FOR LAMPHOLDERS S14s (Sh. 7006-112A-1)
LX-T5-871 GAUGE "B" FOR LAMPHOLDERS S14s (Sh. 7006-112B-1)
LX-T5-872 GAUGE "C" FOR LAMPHOLDERS S14s (Sh. 7006-112C-1)
LX-T5-873 CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
LX-T5-874 NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
LX-T5-875 CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27)
LX-T5-876 NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16&nbLX-SP;A CONNECTORS (IEC 60320-1, F. 27)
LX-T5-877 TEST PLUG WITH SOLID PINS FOR NORMAL OPERATION TEST (Cl. 18, BS 1363-2)
LX-T5-878 SET OF SOLID PINS FOR LX-T5-877 (3 pcs. Cl. 18, BS 1363-2)
LX-T5-879 E10, EP10, EY10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-88 E27 "GO" GAUGE FOR LAMPHOLDERS (7006-25A-2)
LX-T5-880 E39 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-881 ACCEPTANCE GAUGE FOR B22d CAPS INTENDED FOR AUTOMATIC WIRE THREADING (7006-3-1)
LX-T5-882 GAUGE BY22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
LX-T5-883 "GO" GAUGE FOR CAP B22d-3 (25x26) ON FINISHED LAMPS (7006-19-2)
LX-T5-89 E40 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
LX-T5-90 E10 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
LX-T5-91 E10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
LX-T5-92 E40 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-23-3)
LX-T5-95 E40 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-24-3)
LX-T5-XX GAUGES AND TEST PROBES
LX-T6-01 VARIABLE RATIO TRANSFORMER (270 V, 30 A)
LX-T6-04 3-PHASE STABILIZED AC POWER SUPPLY UNIT 3 x 0-450V, 40A
LX-T6-07 3-PHASE AC POWER SUPPLY UNIT 3 x 0-550V, 45A
LX-T6-12 4 STEP DOUBLE PROGRAMMABLE TIMER
LX-T6-16 PROGRAMMABLE OFF SWILX-TCHING COUNTER
LX-T6-17 OFF SWILX-TCHING COUNTER WITH TIMER
LX-T6-19 MOTOR CONTROLLER 200
LX-T6-20 PNEUMATIC DRIVE UNIT
LX-T6-21 SWILX-TCH ACTUATOR CONTROL UNIT
LX-T6-21A SWILX-TCH ACTUATOR (LONGITUDINAL MOVEMENT)
LX-T6-21B SWILX-TCH ACTUATOR (LONGITUDINAL AND CIRCULAR MOVEMENT)
LX-T6-22 3-PHASE AC POWER SUPPY UNIT 3 x 0-520V, 20A (23 kVA)
LX-T6-46 COORDINATE HOLDER
LX-T6-50 RESISTANCE BATTERY 15 kW
LX-T6-60 AIR CORE INDUCTOR 100 mH, 25 A
LX-T6-64 AIR CORE INDUCTOR Imax 63 A, cosj max. 0.6
LX-T6-65 IRON CORE INDUCTOR Imax 40 A, cosj max. 0.3
LX-T6-70 TUNGSTEN LAMP LOAD (BATTERY WITH 60x200W LAMPS)
LX-T6-71 BENCH FOR MECHANICAL TESTS
LX-T6-90 TEST SYSTEM FOR SWILX-TCHES
LX-T6-91 TEST SYSTEM FOR SWILX-TCHES (3 PHASE 3 x 34 kW, max. 440V, 91A, IEC 60669-1)
LX-T6-92 POWER SUPPLY UNIT WITH NON INDUCTIVE RESISTANCE BATTERY (0-280 V, 15 A, 3,9 kVA, BS 1363-2 Cl. 17,18)
LX-T6-93 POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 125 A, 0,3 cos ?)
LX-T6-94 POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 50 A, 0,3 cos ?)
LX-TC150WB TEMPERATURE CHAMBER WITH WATER BATH FOR DETERMINATION OF FROST RESISTANCE OF NATURAL STONE 150l, (600 x 500 x 400 mm), -20°C to + 100 °C (EN 12371)
LX-TK265C TEMPERATURE CHAMBER 265 L, T= -40..50 deg C
LX-TK600C TEMPERATURE CHAMBER 612 L, T= -40..50 deg C
LX-TK600H TEMPERATURE CHAMBER 612 L, T= +35..+300 deg C

    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere Finger Probe Test Test Probe Pin Probe Weighing Sensor
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe